Recycling of an acrylate–glass fiber reinforced polyester composite

Journal of Material Cycles and Waste Management - Recycling possibilities were evaluated for a composite waste composed of glass fiber reinforced polyester bound to a layer of crosslinked...     

Oyster shell reduces PAHs and particulate matter from incense burning

This is the first report showing reduction of particle matter and PAHs from incense burning by addition of oyster shell. Worshiping ancestors and gods by burning incense sticks and joss paper is a very important tradition in many Asian regions. More than 45 % of families in Taiwan burn incense twice a day. Unlike joss paper burning, most of the incense burning occurs indoors, thus creating a risk for human health. Previous reports have indeed evidenced toxicity of incense, notably due to particulate matter and polycyclic aromatic hydrocarbons (PAHs). However, there are few methods to reduce particle matter and PAHs from incense burning. We hypothesize that oyster shell may be used to reduce incense fumes toxicity. Indeed a large amount of unused oyster shell is discarded due to increasing seafood consumption. Here, two types of incense were made in the laboratory, and then 5–30 % of oyster shells were added to the incense to study the reduction of particle matter and PAHs. Results show that reduction of particle matter and PAH emission increased with oyster shell addition. The reduction of emission factors is ?35 % for mean particle matter, ?21 % for particle-phase PAHs, and ?37 % for benzo[a]pyrene equivalent concentration (BaP_eq), using 30 % oyster shell additive. The addition of 10 % oyster shell reduces the burning time by 8.3 min, increases the burning rate by 3.4 mg/min, and reduces particle matter by 6.4 mg/g incense, particle-phase PAHs by 0.67 μg/g incense, and BaP_eq by 0.23 μg/g incense. The reductions of particle matter, particle-phase PAHs, and BaP_eq correspond to about 640 metric tons, 67, and 23 kg, respectively, per year. Our findings will help to produce safer and cleaner incense.     

Stability studies of cholesterol lowering statin drugs in aqueous samples using HPLC and LC–MS

In this study, stability of statin drugs in different conditions, such as various pH, diverse solvents ratio, presence of UV, and sunlight have been investigated. Results suggest strong dependence of statins upon pH, potential environmental persistence towards sun light, and UV light degradation via singlet excited state obtained by excitation into the π–π* band. In acidic conditions interconversion between lactone and hydroxy acid forms in aqueous solutions at room temperature is retarded, while for the same sun-exposed samples are accelerated. Longer exposures lead to the degradation processes. Statin interconversion in water is much lower than in acetonitrile.     

Comparisons of metal leachability for various wastes by extraction and leaching methods

The objective of this research was to evaluate three extraction tests, i.e., toxicity characteristic leaching procedures (TCLP), extraction procedure (EP), and American Society for Testing and Materials (ASTM) methods, for their ability to extract metals in chemical sludge and incineration bottom ash, in terms of the precision of analytical results. Typical chemical sludges, including the electroplating and dye-stuff sludges, the municipal solid waste incineration bottom ash, the leather debris, and the steel-mill bottom residue containing Cd, Cr, Cu, Pb, and Zn were prepared for the lysimetry test (dynamic testing) to compare with the extraction results. Results show that for bottom residue and dye-stuff sludge, the concentration of metal leached was almost the same between the lysimetry leaching and the TCLP tests. The metal concentration followed the order: TCLP approximately = EP > ASTM. TCLP and EP exhibited almost the same relative standard deviation (RSD) value. Therefore, the results of the TCLP tests for bottom residue and dye-stuff sludge, which have a low metal content and alkalinity, can be used to estimate the metal concentration leached by typical acid rain in Taiwan; whereas the ASTM extraction test may be a better indicator of the lysimetry test.     

Survey of dioxin sources in the Baltic Region (extended summary)

The present paper summarises the results of the project: 'Survey of Anthropogenic Sources of Dioxins and Furans in the Baltic Region'. As a part of the project, inventories have been carried out in Estonia, Latvia, Lithuania and Poland by applying the toolkit for quantification of dioxin and furan releases developed by UNEP Chemicals. The main route of direct releases to the environment is emission to air. Total emission to air from Poland was estimated at 490 (88-1,300) g I-TEQ/year, whereas the emissions from Estonia, Latvia and Lithuania were estimated as being 14 (2.4-54), 23 (2.6-63) and 17 (2.6-38) g I-TEQ, respectively. In general, the uncertainty on the estimates is very high, and recommendations regarding further development of the inventories have been made, and measures for reducing the releases have been provided.     

Analysis of polychlorodibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) in baked-salt food additives in Korea

Thirty-one samples of baked-salt products used in commercial food additives were analyzed for the presence of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). Dioxins were highly detected in 12 samples of baked salts. The amount of dioxins found in the samples ranged from 12.47 pg/g to 406.56 pg/g (0.71 pg TEQ/g to 23.51 pg TEQ/g, respectively). The most abundant congeners, as TEQ values, were 2,3,4,7,8-PeCDF; 1,2,3,7,8-PeCDF; and 1,2,3,4,7,8-HxCDF in PCDF congeners and 1,2,3,7,8-PeCDD; 1,2,3,6,7,8-HxCDD; and 1,2,3,7,8,9-HxCDD in PCDD congeners. Meanwhile, PCDDs/PCDFs were analyzed in high-temperature-treated samples of natural sea salt alone and natural sea salt to which di-(2-ethylhexyl)phthalate (DEHP) had been added. In the former case, PCDD/PCDF formation was most evident at temperatures near 450 degrees C, the total amount of dioxins was 90.07 pg/g (6.07 pg TEQ/g), and PCDD congeners comprised less than 50% of the total PCDDs/PCDFs. However, when the latter samples were heated, the total PCDD/PCDF concentration was 512.30 pg/g (21.53 pg TEQ/g), with PCDD congeners comprising over 87% of the total PCDDs/PCDFs.     

Stabilization of Cu-contaminated army firing range soils using waste oyster shells

A stabilization/solidification (S/S) process was used to immobilize Cu in contaminated soils obtained from two army firing ranges sites (A and B) with total Cu concentrations of 520 and 380 mg/kg, respectively. Both waste oyster shells (WOS) and pretreated oyster shells (POS) were used to immobilize Cu in the contaminated soils. Waste oyster shells passing the #10 mesh and #20 mesh were used for the Sites A and B, respectively. WOS- and POS-treated soil samples cured for 28 days were evaluated for Cu leaching by the Korean Standard Leaching Test (KSLT) method. Slurry suspensions were prepared to investigate the Cu immobilization mechanism using X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) energy dispersive X-ray spectroscopy (EDX) analyses. The treatment results showed that the POS treatment was more effective than the WOS treatment of 28 days. For Site A, 10 wt% WOS and 3 wt% POS dosages were required to pass the Korean warning standard of 50 mg/kg, while 10 wt% WOS and 5 wt% POS dosages were required for the Site B treatment. The XRPD and SEM-EDX results showed that Cu immobilization was strongly linked to both CSH/CAH and ettringite. Overall, the POS treatment was effective at immobilizing the Cu in the contaminated soils, very likely due to its CaO content.     

Food waste impact on municipal solid waste angle of internal friction

The impact of food waste content on the municipal solid waste (MSW) friction angle was studied. Using reconstituted fresh MSW specimens with different food waste content (0%, 40%, 58%, and 80%), 48 small-scale (100-mm-diameter) direct shear tests and 12 large-scale (430 mm × 430 mm) direct shear tests were performed. A stress-controlled large-scale direct shear test device allowing approximately 170-mm sample horizontal displacement was designed and used. At both testing scales, the mobilized internal friction angle of MSW decreased considerably as food waste content increased. As food waste content increased from 0% to 40% and from 40% to 80%, the mobilized internal friction angles (estimated using the mobilized peak (ultimate) shear strengths of the small-scale direct shear tests) decreased from 39° to 31° and from 31° to 7°, respectively, while those of large-scale tests decreased from 36° to 26° and from 26° to 15°, respectively. Most friction angle measurements produced in this study fell within the range of those previously reported for MSW.